Bathroom Rewiring in Giffnock, Glasgow
Bathrooms require specialist electrical work due to the proximity of water. Electric Cal carries out bathroom rewiring and electrical installations to the required safety standards across Giffnock, Newton Mearns, Clarkston and Glasgow Southside.
Electrical regulations in bathrooms
Bathrooms are classified as special locations under BS 7671 because of the increased risk of electric shock when water is present. The regulations divide the bathroom into zones, and each zone has specific requirements for what type of equipment can be installed and how circuits must be protected.
Zone 0 is inside the bath or shower tray. Only SELV (Separated Extra-Low Voltage) equipment rated to IPX7 can be installed here. Zone 1 is directly above the bath or shower to a height of 2.25m. Equipment here must be rated to at least IPX4 (or IPX5 if water jets are likely) and suitable for the zone. Zone 2 extends 0.6m beyond Zone 1 and includes the area around a washbasin. Fittings here must be at least IPX4.
Outside these zones, standard fittings can be used, but all bathroom circuits must be protected by a 30mA RCD. Sockets are not permitted in bathrooms unless they are SELV sockets (such as shaver sockets) or the bathroom is large enough that the socket is at least 3m from the nearest bath or shower.
These rules exist for good reason. Getting bathroom electrics wrong is dangerous. This is not an area where DIY or unqualified work should be attempted.
What does a bathroom rewire include?
A bathroom rewire typically involves replacing all wiring within the room, installing correctly zoned and IP-rated light fittings, providing a suitable circuit for an electric shower (usually a dedicated radial circuit from the consumer unit), connecting an extractor fan (either on a timer, a humidistat, or linked to the light switch), and installing a pull-cord switch or external switch for the lighting circuit.
If you are installing an electric shower, this is one of the highest-powered appliances in a domestic property. A 9.5kW shower, for example, draws around 41 amps and requires a dedicated circuit with appropriately rated cable and MCB. This is not something that can be added to an existing circuit. We install the dedicated supply, fit the shower, and test the complete circuit.
Heated towel rails, underfloor heating, mirror demisters, and illuminated bathroom cabinets also need to be wired correctly based on their zone location. These are all common elements of modern bathroom electrics, and we’ll make sure they’re installed safely and in accordance with the manufacturer’s instructions and BS 7671.
Working alongside your bathroom fitter
Like kitchen work, bathroom electrical work is typically done in two stages. The first fix involves routing cables for lighting, the shower, the extractor fan, and any other electrical items before the room is tiled and the suite is fitted. The second fix involves connecting fittings and appliances after the tiling and suite installation is complete.
Coordinating the timing is important. Cables need to be in place before walls are tiled, because retrospectively routing cables through tiled walls is disruptive and expensive. If you are working with a bathroom fitter or plumber, let us know the schedule and we will fit around it.
If you’re managing the renovation yourself, or planning a wider house rewire, we can advise on the sequence of work to make sure the electrical first fix happens at the right point in the project.
Get a bathroom rewire quote
If you are renovating your bathroom or need electrical work carried out in an existing bathroom, contact us. We will survey the room, discuss what you need, and provide a clear, fixed-price quote.
All bathroom electrical work is completed to BS 7671 and issued with the appropriate certification. NICEIC registration means the work is independently verified to meet the required standard.
We carry out bathroom rewiring across Giffnock, Newton Mearns, Clarkston, Shawlands, Cathcart, Newlands, Netherlee, and the wider Glasgow Southside area.
Why choose Electric Cal
NICEIC Approved Contractor
Every job is carried out to the highest industry standards and independently assessed by NICEIC. Your work is certified, your home is protected, and you have the backing of a nationally recognised approval body.
Domestic & Commercial
Fully qualified for both home and business electrical work.
All Work Certified
Every job completed to BS 7671 wiring regulations with certification provided.
Local to Glasgow Southside
Based in Newton Mearns, serving Giffnock, Clarkston, Shawlands and surrounding areas.
Free Quotes
No obligation quotes provided for all work.
City & Guilds Accredited
Qualified to City & Guilds standards including 18th Edition and Level 3 Inspection and Testing.
What our customers say
Accreditations & qualifications
Areas we serve
Electric Cal provides professional electrical services across Glasgow's Southside and East Renfrewshire, including:
- Giffnock
- Clarkston
- Newton Mearns
- Shawlands
- Strathbungo
- Newlands
- Pollokshaws
- Eastwood
- Thornliebank
- Cathcart
- Muirend
- Netherlee
- Stamperland
- Jackton
- Thorntonhall
- Langside
- Battlefield
- Camphill
- Mount Florida
- King's Park
- Eaglesham
- Waterfoot
- Busby
- Darnley
- Burnside
- Rutherglen
- Glasgow City Centre
Need an electrician?
Call now for a free, no obligation quote
07311 395 935