PAT Testing for Businesses & Landlords in Glasgow Southside
Portable Appliance Testing checks the safety of electrical equipment that plugs into a socket. Electric Cal provides PAT testing for businesses, landlords, and organisations across Giffnock, Newton Mearns and Glasgow Southside.
What is PAT testing?
PAT testing is the inspection and testing of portable electrical appliances to make sure they are safe to use. It covers anything with a plug: kettles, computers, power tools, extension leads, phone chargers, printers, and any other equipment that is plugged into a mains socket.
The test involves a visual inspection of the appliance, the plug, and the cable, followed by electrical tests using a dedicated PAT tester. The tests check earth continuity, insulation resistance, and lead polarity. Each appliance is either passed or failed, and a label is attached showing the test date and result.
PAT testing is separate from an Electrical Installation Condition Report (EICR), which covers the fixed wiring in a property. PAT testing covers the portable equipment that is plugged into that fixed wiring. They serve different purposes, but both form important parts of our wider electrical testing and inspection services.
Who needs PAT testing?
There is no single law that says you must have PAT testing carried out, but several regulations require employers and landlords to ensure that electrical equipment is safe. The Electricity at Work Regulations 1989, the Health and Safety at Work Act 1974, and the Provision and Use of Work Equipment Regulations 1998 all place duties on employers to maintain electrical equipment in a safe condition.
In practice, this means that businesses, offices, shops, workshops, and shared workspaces should have portable appliances tested at regular intervals. Landlords who provide electrical appliances as part of a furnished let should also consider PAT testing those items, as the general duty of care applies. They should also ensure they have a valid Landlord Electrical Certificate where required.
Schools, churches, community halls, and any organisation that uses portable electrical equipment for events or activities should also have regular PAT testing. If someone were injured by a faulty appliance and you could not demonstrate that it had been tested, you could face liability.
How often should PAT testing be done?
The frequency depends on the type of equipment and the environment it is used in. The IET Code of Practice for In-service Inspection and Testing of Electrical Equipment provides guidance on recommended intervals. As a general rule, equipment in offices and low-risk environments should be tested every two to four years, while equipment in more demanding environments such as workshops, kitchens, and construction sites should be tested annually or more frequently.
New equipment does not need to be tested immediately but should be visually inspected and included in the next scheduled testing cycle. Equipment that is moved frequently, used outdoors, or subject to heavy wear should be tested more often than equipment that stays in one place.
We can advise on an appropriate testing schedule based on your specific situation and the type of equipment you use.
PAT testing across Glasgow Southside
We provide PAT testing for businesses and organisations across Giffnock, Newton Mearns, Clarkston, Shawlands, and the wider Glasgow Southside area. We can test equipment on your premises at a time that works for you, with minimal disruption to your working day.
Each appliance is tested, labelled, and recorded on a formal register that you can keep for your compliance records. If any appliances fail, we will let you know immediately and advise on whether they can be repaired or should be replaced.
Contact us to discuss your PAT testing requirements and get a quote.
Why choose Electric Cal
NICEIC Approved Contractor
Every job is carried out to the highest industry standards and independently assessed by NICEIC. Your work is certified, your home is protected, and you have the backing of a nationally recognised approval body.
Domestic & Commercial
Fully qualified for both home and business electrical work.
All Work Certified
Every job completed to BS 7671 wiring regulations with certification provided.
Local to Glasgow Southside
Based in Newton Mearns, serving Giffnock, Clarkston, Shawlands and surrounding areas.
Free Quotes
No obligation quotes provided for all work.
City & Guilds Accredited
Qualified to City & Guilds standards including 18th Edition and Level 3 Inspection and Testing.
What our customers say
Accreditations & qualifications
Areas we serve
Electric Cal provides professional electrical services across Glasgow's Southside and East Renfrewshire, including:
- Giffnock
- Clarkston
- Newton Mearns
- Shawlands
- Strathbungo
- Newlands
- Pollokshaws
- Eastwood
- Thornliebank
- Cathcart
- Muirend
- Netherlee
- Stamperland
- Jackton
- Thorntonhall
- Langside
- Battlefield
- Camphill
- Mount Florida
- King's Park
- Eaglesham
- Waterfoot
- Busby
- Darnley
- Burnside
- Rutherglen
- Glasgow City Centre
Need an electrician?
Call now for a free, no obligation quote
07311 395 935